(12-04-2014 12:46 PM)Vinchenz Wrote: [ -> ]With all honesty guys, this is nothing new and you can do it by hand, The software is just a mask hiding what it is doing under the hood.
Watch this video here and follow the instructions Carefully and slowly the 1st time until you get used to it.
also do not choose 1080P bitrate unless you have a Quad Core PC with 6 Megs or more.
I use 720P with my dual core 4 meg machine and its very good.
Code:
https://www.youtube.com/embed/koM1m_PhRwk
The video is excellent and in it there comes a point where you have to select your video encoder at which point the narrator recommends Wirecast for YouTube. From what I can tell it seems you can download the free version right there from within the YT interface. Thanks for the help Vinchenz repped you for your assist.
Yes you can download a working version straight from the youtube banner inside of youtube for wirecast.
On set up choose custom decoder - wirecast and a bit rate of 720 P
Go to your Video Manager, then go to Live Event, then on the right hand side, create New Live Event.
Schedule live event for 2 weeks out not today.. once the live event is scheduled you will have the option of choosing your encoder which will be Wirecast - bit rate settings 720p - set up a custom optimized thumbnail of 1280 x720 and click save, after that you can click on Live Control Room..
(12-04-2014 12:46 PM)Vinchenz Wrote: [ -> ]With all honesty guys, this is nothing new and you can do it by hand, The software is just a mask hiding what it is doing under the hood.
Watch this video here and follow the instructions Carefully and slowly the 1st time until you get used to it.
also do not choose 1080P bitrate unless you have a Quad Core PC with 6 Megs or more.
I use 720P with my dual core 4 meg machine and its very good.
Code:
https://www.youtube.com/embed/koM1m_PhRwk
I can't find the encoder setting over youtube live event. It is showing me the Go live now button instead of create event as i have seen on video. Go live btn redirecting me to hangout video, how will this works ?
(12-05-2014 12:40 AM)Vinchenz Wrote: [ -> ]Go to your Video Manager, then go to Live Event, then on the right hand side, create New Live Event.
Schedule live event for 2 weeks out not today.. once the live event is scheduled you will have the option of choosing your encoder which will be Wirecast - bit rate settings 720p - set up a custom optimized thumbnail of 1280 x720 and click save, after that you can click on Live Control Room..
(12-04-2014 12:46 PM)Vinchenz Wrote: [ -> ]With all honesty guys, this is nothing new and you can do it by hand, The software is just a mask hiding what it is doing under the hood.
Watch this video here and follow the instructions Carefully and slowly the 1st time until you get used to it.
also do not choose 1080P bitrate unless you have a Quad Core PC with 6 Megs or more.
I use 720P with my dual core 4 meg machine and its very good.
Code:
https://www.youtube.com/embed/koM1m_PhRwk
I can't find the encoder setting over youtube live event. It is showing me the Go live now button instead of create event as i have seen on video. Go live btn redirecting me to hangout video, how will this works ?
Yeah i didn't notice the Schedule option. Now working fine. Can Wirecast works on Server 2008 or 2012. I am planning to buy the VPS to upload the videos over there. Thanks.