[GET] SenukeX 2.5.1 Cracked

[phkk]

[b]sadpart8[/b] . i dont think they banned you. it happened on me beefore. I have to wait couple to run the update again. If i canceld the updating while it was running. It blocked me out

[welch45]

I am not able to create an email account for profile.. :( email account fail always. Never happened before, but I have tried 2.4.26 and 2.5.1.

The service has used 54 captchas but still is not able to create even 1 working email account either hotmail or yahoo.. dont know what is fckin prob is..

[larsonsrobert]

Senukex 2.5.1 latest crack working for me great , yes sometime crash but i do not loss any data here many people they dnt know using senukex and also dnt know about installation .. so they think crack is not working but problem in their computers and installation process .. so guys enjoy with free stuff ..

[ntopcugil]

it's crashing

[zazuzazu]

Firs I also couldn't update but next I did what....
run senukeX and then run setup.exe. It will swear that if you run setup and the same time senuke is running it's very bad and exposed to risk that whole senuke may crash and offers to close senuke. DO NOT agree to close senuke and run update. Then it should run update smoothly and finally will say that all files are verified to v 2.5.1.

This trick worked for me. Try you too. Here is the setup.exe file of the 2.5.1 version:
http://www.mediafire.com/?9ml731xbndvtlbc

[CyberPunk]

I have a few things about these halfway "cracked" versions of SENuke running around..

First of all, the reason why the app shuts down randomly, is because of another (probably) a timer that runs possibly about every 15 minutes to check the activation state of the software. If the activation state is not "activated" then the program self closes. It does not CRASH so therefore it is not logged! It is a security check!

The person who has been cracking these versions of senuke only patches it to bypass the login, however he does not set the activation status to "activated". Here is comparing original to cracked:

Code:

Originally:
If (result.Status = ActivationStatus.Activated) Then

Cracked:
If (result.Status <> ActivationStatus.Activated) Then

So it connects to senuke servers using auth.senuke.com, if that fails (using a try catch), it tries auth2.senuke.com

The old bypasses where you remap the host file to a site that shows a "working" login string (A|XXXX|xxxxx|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) does not work as of now. SENuke now uses HTTPS and also POSTs the data to the server. Before it used the GET request. When SENuke connects to the old methods, it tries SSL and fails.. even if you setup https (ssl) when it tries to post the data, it fails... So even a working "string" to login doesn't work using the host redirects. Someone would have to make the server use HTTPS and also accept the POST data, and echo out the "string" to login.

Back to this crack.. it just sets "if the activation status is not equal to activated then login" It never does set the activated status flag to activated in the program.. So when the every "15 minute" or however long security check runs, the app detects its running and isnt activated and closes...

Solution... Cracker needs to set the application to "Activated" also.

Blocking "updates.senuke.com" is not needed, all that is used for is the update checking.. So if its not blocked, you will know if there is a new update. Just don't update, its just an alert telling you to search google for the latest crack. IN the setting, tell it not to automatically update it, so that you can control when you update!

The app still connects to http://www.senuke.com for things such as the spinner, auto download of hotmail account, ect. These should still be blocked in the host file so we aren't filling the logs indicating alot of people are running cracked versions... its a red flag to SENuke's team!

block these:

Code:

x.x.x.x senuke.com
x.x.x.x www.senuke.com
x.x.x.x auth.senuke.com
x.x.x.x auth2.senuke.com

As for the original post to this thread, http://www.site.com in the host file is invalid and should not contain the http://

Amateurs...

PS: I personally have cracked senuke myself, at this point 2.5.1. It doesnt shut down on me, because I cracked the d*** thing correctly. it isn't hard, took 15 mins. No I will not release it, it is my security so that I always have it cracked within minutes of an update. I just commented here, because you guys are relying on an amateur cracker to supply you with a half assed crack.

[CyberPunk]

I have a few things about these halfway "cracked" versions of SENuke running around..

First of all, the reason why the app shuts down randomly, is because of another (probably) a timer that runs possibly about every 15 minutes to check the activation state of the software. If the activation state is not "activated" then the program self closes. It does not CRASH so therefore it is not logged! It is a security check!

The person who has been cracking these versions of senuke only patches it to bypass the login, however he does not set the activation status to "activated". Here is comparing original to cracked:

Code:

Originally:
If (result.Status = ActivationStatus.Activated) Then

Cracked:
If (result.Status <> ActivationStatus.Activated) Then

So it connects to senuke servers using auth.senuke.com, if that fails (using a try catch), it tries auth2.senuke.com

The old bypasses where you remap the host file to a site that shows a "working" login string (A|XXXX|xxxxx|xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx) does not work as of now. SENuke now uses HTTPS and also POSTs the data to the server. Before it used the GET request. When SENuke connects to the old methods, it tries SSL and fails.. even if you setup https (ssl) when it tries to post the data, it fails... So even a working "string" to login doesn't work using the host redirects. Someone would have to make the server use HTTPS and also accept the POST data, and echo out the "string" to login.

Back to this crack.. it just sets "if the activation status is not equal to activated then login" It never does set the activated status flag to activated in the program.. So when the every "15 minute" or however long security check runs, the app detects its running and isnt activated and closes...

Solution... Cracker needs to set the application to "Activated" also.

Blocking "updates.senuke.com" is not needed, all that is used for is the update checking.. So if its not blocked, you will know if there is a new update. Just don't update, its just an alert telling you to search google for the latest crack. IN the setting, tell it not to automatically update it, so that you can control when you update!

The app still connects to http://www.senuke.com for things such as the spinner, auto download of hotmail account, ect. These should still be blocked in the host file so we aren't filling the logs indicating alot of people are running cracked versions... its a red flag to SENuke's team!

block these:

Code:

x.x.x.x senuke.com
x.x.x.x www.senuke.com
x.x.x.x auth.senuke.com
x.x.x.x auth2.senuke.com

As for the original post to this thread, http://www.site.com in the host file is invalid and should not contain the http://

Amateurs...

PS: I personally have cracked senuke myself, at this point 2.5.1. It doesnt shut down on me, because I cracked the d*** thing correctly. it isn't hard, took 15 mins. No I will not release it, it is my security so that I always have it cracked within minutes of an update. I just commented here, because you guys are relying on an amateur cracker to supply you with a half assed crack.

[CyberPunk]

It keeps crashing because it was cracked by an amateur. The app self checks every x minutes to check the "activated" flag. If it isn't activated, it closes itself. No crash, no error, its an "anticracking" feature of senuke. The cracker bypasses the login so an invalid login works, but never sets the applications status to "activated".. This it kills itself. It is a halfway cracked version, done by an amateur.

[Chedicorn99]

Ah man keeps crashing. No matter what I do.

Also get error "invalid win 32 application"

but when I start again it's gone.

Hope that helps in resolving.

It's not an application compatibility issue as I've tested this over

three OS's in VM's.

Definately either the Crack Or Just The Version Of SEnuke.

They did add that article builder to it, and whenever they add something it's usually unstable for a few updates.

[corleone]

@doggie, it doesnt matter even you are newbie or pro to reversing, the important is that you share something that could give help on others. im too are still amateur, im not proclaiming myself as a pro, but i know those pro's even those resputed teams on the scene still make some mistakes on their releases not always perfect crack.

btw it seems that you are so fear to patch the way how you crack the program so you wont release it, lol you are not a cracker for me, its normal to change and add security of those program by its developers, that give's the colors on cracking, face new challenges and you will not bored.

you know that i already cracked many versions of it, the way i crack it is not only method since they are not changing their security so im the one who give myself a challenge to find more patches to crack it.