Senuke XCR 3.0.19.0

[supercharger]

(10-20-2012 11:25 AM)Omega Wrote:  Here is the latest update of senuke.

If you have it installed already then use the updater to update the version on your computer.
If you do not have it installed, then use the setup file to install it.

After it is up to date then copy the patch over.

Code:

https://www.virustotal.com/file/a9acd4f119b93dbbf3eeb216c5a4ad4acf6a48388a367e3da8b686c679ad09d0/analysis/1350696159/

File name: SENuke-3.0.19.0.bbhf.rar
Detection ratio: 0 / 43

Faultless, smooth and that is just Omega!

Works fine, all options tested and working that work with this work around :)

Cheers for all your efforts O!

[bbhfx]

Working fine, only follow instructions.
Thank you Omega!

[FuriousD]

Hey Thanks for the upload, everything works fine besides this one problem im having with the macro recorder.

Currently it will get stuck after the navigate command, the error will say "String cannot be of zero length.
Parameter name: oldValue"

So if the steps are:
Step 1 Navigate - Url
Step 2 Wait For
Step 3 Click Item
etc..

It will stop at step 1, if i start from step 2 it will continue with everything else.

Is this a issue with the cracked versions? or my side only?

[FuriousD]

Hey Thanks for the upload, everything works fine besides this one problem im having with the macro recorder.

Currently it will get stuck after the navigate command, the error will say "String cannot be of zero length.
Parameter name: oldValue"

So if the steps are:
Step 1 Navigate - Url
Step 2 Wait For
Step 3 Click Item
etc..

It will stop at step 1, if i start from step 2 it will continue with everything else.

Is this a issue with the cracked versions? or my side only?

[FuriousD]

Hey Thanks for the upload, everything works fine besides this one problem im having with the macro recorder.

Currently it will get stuck after the navigate command, the error will say "String cannot be of zero length.
Parameter name: oldValue"

So if the steps are:
Step 1 Navigate - Url
Step 2 Wait For
Step 3 Click Item
etc..

It will stop at step 1, if i start from step 2 it will continue with everything else.

Is this a issue with the cracked versions? or my side only?

[FuriousD]

Hey Thanks for the upload, everything works fine besides this one problem im having with the macro recorder.

Currently it will get stuck after the navigate command, the error will say "String cannot be of zero length.
Parameter name: oldValue"

So if the steps are:
Step 1 Navigate - Url
Step 2 Wait For
Step 3 Click Item
etc..

It will stop at step 1, if i start from step 2 it will continue with everything else.

Is this a issue with the cracked versions? or my side only?

[e3fn45fn44]

Men it's working finally...thanks :)

[FuriousD]

Sorry for the 4 billion posts, it wont let me delete them.

My problem was solved, all i had to do is add details when logging in so username and password i never use to do it.

[theimbible]

Nice one, thanks

[tono4850]

I am a newbie, is it nulled or why it requires me to enter username and passsword ? thx in advance