03-23-2013, 03:23 PM
03-23-2013, 07:18 PM
Hi,
I already updated Senuke XCR 3.0.73.. but its not working..
Any one facing same problem.
If you know solution then give me PM or share it guys..
Thanks in advance
I already updated Senuke XCR 3.0.73.. but its not working..
Any one facing same problem.
If you know solution then give me PM or share it guys..
Thanks in advance
03-23-2013, 07:22 PM
It won't run when i use the crack. Also added the needed lines to the host file.
I can't run it. It's showing Critical Failure: Expectation Failed in EDBB573054424F948E18EFF676D0C552
I can't run it. It's showing Critical Failure: Expectation Failed in EDBB573054424F948E18EFF676D0C552
03-23-2013, 08:36 PM
3rd effort this morning >
I followed directions last night>
Till I threw up my hands.
This 3rd effort just shows what I don't know.
Whatever needs to complete - does not.
I do not know enough about it to correct anything
that is wrong.
PLATFORM VERSION INFO
Windows : 5.1.2600.196608 (Win32NT)
Common Language Runtime : 4.0.30319.296
System.Deployment.dll : 4.0.30319.1 (RTMRel.030319-0100)
clr.dll : 4.0.30319.296 (RTMGDR.030319-2900)
dfdll.dll : 4.0.30319.1 (RTMRel.030319-0100)
dfshim.dll : 4.0.31106.0 (Main.031106-0000)
SOURCES
Deployment url : file:///C:/SENuke-3.0.73/SENukeUpdater.application
Deployment Provider url : http://www.senuke.com/SENukeUpdate/Insta...pplication
Server : Apache
Application url : http://www.senuke.com/SENukeUpdate/Insta...e.manifest
Server : Apache
IDENTITIES
Deployment Identity : SENukeUpdater.application, Version=3.0.0.13, Culture=neutral, PublicKeyToken=6bd516f55a28bdae, processorArchitecture=x86
Application Identity : SENukeUpdater.exe, Version=3.0.0.13, Culture=neutral, PublicKeyToken=6bd516f55a28bdae, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Installable application.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of C:\SENuke-3.0.73\SENukeUpdater.application resulted in exception. Following failure messages were detected:
+ Value does not fall within the expected range.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [3/23/2013 6:28:54 AM] : Activation of C:\SENuke-3.0.73\SENukeUpdater.application has started.
* [3/23/2013 6:28:54 AM] : Processing of deployment manifest has successfully completed.
* [3/23/2013 6:28:54 AM] : Installation of the application has started.
* [3/23/2013 6:28:54 AM] : Processing of application manifest has successfully completed.
* [3/23/2013 6:28:55 AM] : Found compatible runtime version 4.0.30319.
* [3/23/2013 6:28:55 AM] : Request of trust and detection of platform is complete.
* [3/23/2013 6:28:55 AM] : Commit of the downloaded application has started.
* [3/23/2013 6:28:55 AM] : Installation of application has successfully completed.
ERROR DETAILS
Following errors were detected during this operation.
* [3/23/2013 6:28:55 AM] System.ArgumentException
- Value does not fall within the expected range.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.NativeMethods.CorLaunchApplication(UInt32 hostType, String applicationFullName, Int32 manifestPathsCount, String[] manifestPaths, Int32 activationDataCount, String[] activationData, PROCESS_INFORMATION processInformation)
at System.Deployment.Application.ComponentStore.ActivateApplication(DefinitionAppId appId, String activationParameter, Boolean useActivationParameter)
at System.Deployment.Application.SubscriptionStore.ActivateApplication(DefinitionAppId appId, String activationParameter, Boolean useActivationParameter)
at System.Deployment.Application.ApplicationActivator.Activate(DefinitionAppId appId, AssemblyManifest appManifest, String activationParameter, Boolean useActivationParameter)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
* Transaction at [3/23/2013 6:28:55 AM]
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: WXXD2OQH.DG4.application
+ System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
- Status: Set
- HRESULT: 0x0
+ System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
- Status: Set
- HRESULT: 0x0
+ System.Deployment.Internal.Isolation.StoreTransactionOperationType (27)
- HRESULT: 0x0
Apparently, more issues,
I will wait until version 74.
Hope the bugs are ironed out by then.
Thanks for your efforts.
Whatever the reason - It does not complete.
Is there a portable version in the works somewhere?
Again,
Thank you for your efforts.
I followed directions last night>
Till I threw up my hands.
This 3rd effort just shows what I don't know.
Whatever needs to complete - does not.
I do not know enough about it to correct anything
that is wrong.
PLATFORM VERSION INFO
Windows : 5.1.2600.196608 (Win32NT)
Common Language Runtime : 4.0.30319.296
System.Deployment.dll : 4.0.30319.1 (RTMRel.030319-0100)
clr.dll : 4.0.30319.296 (RTMGDR.030319-2900)
dfdll.dll : 4.0.30319.1 (RTMRel.030319-0100)
dfshim.dll : 4.0.31106.0 (Main.031106-0000)
SOURCES
Deployment url : file:///C:/SENuke-3.0.73/SENukeUpdater.application
Deployment Provider url : http://www.senuke.com/SENukeUpdate/Insta...pplication
Server : Apache
Application url : http://www.senuke.com/SENukeUpdate/Insta...e.manifest
Server : Apache
IDENTITIES
Deployment Identity : SENukeUpdater.application, Version=3.0.0.13, Culture=neutral, PublicKeyToken=6bd516f55a28bdae, processorArchitecture=x86
Application Identity : SENukeUpdater.exe, Version=3.0.0.13, Culture=neutral, PublicKeyToken=6bd516f55a28bdae, processorArchitecture=x86, type=win32
APPLICATION SUMMARY
* Installable application.
ERROR SUMMARY
Below is a summary of the errors, details of these errors are listed later in the log.
* Activation of C:\SENuke-3.0.73\SENukeUpdater.application resulted in exception. Following failure messages were detected:
+ Value does not fall within the expected range.
COMPONENT STORE TRANSACTION FAILURE SUMMARY
No transaction error was detected.
WARNINGS
There were no warnings during this operation.
OPERATION PROGRESS STATUS
* [3/23/2013 6:28:54 AM] : Activation of C:\SENuke-3.0.73\SENukeUpdater.application has started.
* [3/23/2013 6:28:54 AM] : Processing of deployment manifest has successfully completed.
* [3/23/2013 6:28:54 AM] : Installation of the application has started.
* [3/23/2013 6:28:54 AM] : Processing of application manifest has successfully completed.
* [3/23/2013 6:28:55 AM] : Found compatible runtime version 4.0.30319.
* [3/23/2013 6:28:55 AM] : Request of trust and detection of platform is complete.
* [3/23/2013 6:28:55 AM] : Commit of the downloaded application has started.
* [3/23/2013 6:28:55 AM] : Installation of application has successfully completed.
ERROR DETAILS
Following errors were detected during this operation.
* [3/23/2013 6:28:55 AM] System.ArgumentException
- Value does not fall within the expected range.
- Source: System.Deployment
- Stack trace:
at System.Deployment.Application.NativeMethods.CorLaunchApplication(UInt32 hostType, String applicationFullName, Int32 manifestPathsCount, String[] manifestPaths, Int32 activationDataCount, String[] activationData, PROCESS_INFORMATION processInformation)
at System.Deployment.Application.ComponentStore.ActivateApplication(DefinitionAppId appId, String activationParameter, Boolean useActivationParameter)
at System.Deployment.Application.SubscriptionStore.ActivateApplication(DefinitionAppId appId, String activationParameter, Boolean useActivationParameter)
at System.Deployment.Application.ApplicationActivator.Activate(DefinitionAppId appId, AssemblyManifest appManifest, String activationParameter, Boolean useActivationParameter)
at System.Deployment.Application.ApplicationActivator.PerformDeploymentActivation(Uri activationUri, Boolean isShortcut, String textualSubId, String deploymentProviderUrlFromExtension, BrowserSettings browserSettings, String& errorPageUrl)
at System.Deployment.Application.ApplicationActivator.ActivateDeploymentWorker(Object state)
COMPONENT STORE TRANSACTION DETAILS
* Transaction at [3/23/2013 6:28:55 AM]
+ System.Deployment.Internal.Isolation.StoreOperationStageComponent
- Status: Installed
- HRESULT: 0x0
- Manifest: WXXD2OQH.DG4.application
+ System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
- Status: Set
- HRESULT: 0x0
+ System.Deployment.Internal.Isolation.StoreOperationSetDeploymentMetadata
- Status: Set
- HRESULT: 0x0
+ System.Deployment.Internal.Isolation.StoreTransactionOperationType (27)
- HRESULT: 0x0
Apparently, more issues,
I will wait until version 74.
Hope the bugs are ironed out by then.
Thanks for your efforts.
Whatever the reason - It does not complete.
Is there a portable version in the works somewhere?
Again,
Thank you for your efforts.
03-23-2013, 09:37 PM
Hello,
The software does NOT work anymore...
It gives this error:
Critical Failure: Expectation Failed in EDBB573054424F948E18EFF676D0C552.
I updated the host file but the problem still exist...
Any one help...
Thanks
The software does NOT work anymore...
It gives this error:
Critical Failure: Expectation Failed in EDBB573054424F948E18EFF676D0C552.
I updated the host file but the problem still exist...
Any one help...
Thanks
03-23-2013, 11:19 PM
Listen guy's these update .73 is corupted and not crack!Omega can only crack softwear not fixing it!So i first go to senuke forum to find answear and if nobody is complaining there then maybe i will try to find solution here.
Conclusion:Make campaign with .72 and when you export it change to .73 and wait for .74 other problems can be related with Windows or NET or something else...
Conclusion:Make campaign with .72 and when you export it change to .73 and wait for .74 other problems can be related with Windows or NET or something else...
03-24-2013, 12:20 AM
(03-23-2013 11:19 PM)nightquest Wrote: [ -> ]Listen guy's these update .73 is corupted and not crack!Omega can only crack softwear not fixing it!So i first go to senuke forum to find answear and if nobody is complaining there then maybe i will try to find solution here.Dude, can you explain in detail how you did that? Like step by step, since more people are having trouble using the crack. I speak for the general people who had the same issue as me. Thanks a lot man!
Conclusion:Make campaign with .72 and when you export it change to .73 and wait for .74 other problems can be related with Windows or NET or something else...
03-24-2013, 12:29 AM
Hmm.. too many people here don't know how to make this senuke crack works.
here is tutor for you guys :
here is tutor for you guys :
Magic Button :
Windows Xp
step 1 : run senuke updater
step 2 : in senuke folder, replace SENuke.exe with omega crack
step 3 : Restart your windows and run in safe mode
step 4 : go to c:\windows\system32\drivers\etc\
step 5 : edit hosts file and add this line:
127.0.0.1 auth.senuke.com
127.0.0.1 http://www.auth.senuke.com
step 6 : save your host file
step 7 : restart your windows
step 8 : Run SENuke and it will working perfectly
step 9 : Enjoy it Guys.
step 10 : press [+1] ADD REPUTATION button if this tutor can help you.
step 1 : run senuke updater
step 2 : in senuke folder, replace SENuke.exe with omega crack
step 3 : Restart your windows and run in safe mode
step 4 : go to c:\windows\system32\drivers\etc\
step 5 : edit hosts file and add this line:
127.0.0.1 auth.senuke.com
127.0.0.1 http://www.auth.senuke.com
step 6 : save your host file
step 7 : restart your windows
step 8 : Run SENuke and it will working perfectly
step 9 : Enjoy it Guys.
step 10 : press [+1] ADD REPUTATION button if this tutor can help you.
03-24-2013, 12:33 AM
Hmm.. too many people here don't know how to make this senuke crack works.
here is tutor for you guys :
here is tutor for you guys :
Magic Button :
Windows Xp
step 1 : run senuke updater
step 2 : in senuke folder, replace SENuke.exe with omega crack
step 3 : Restart your windows and run in safe mode
step 4 : go to c:\windows\system32\drivers\etc\
step 5 : edit hosts file and add this line:
step 6 : save your host file
step 7 : restart your windows
step 8 : Run SENuke and it will working perfectly
step 9 : Enjoy it Guys.
step 10 : press [+1] ADD REPUTATION button if this tutor can help you.
step 1 : run senuke updater
step 2 : in senuke folder, replace SENuke.exe with omega crack
step 3 : Restart your windows and run in safe mode
step 4 : go to c:\windows\system32\drivers\etc\
step 5 : edit hosts file and add this line:
Code:
127.0.0.1 auth.senuke.com
127.0.0.1 www.auth.senuke.com
step 7 : restart your windows
step 8 : Run SENuke and it will working perfectly
step 9 : Enjoy it Guys.
step 10 : press [+1] ADD REPUTATION button if this tutor can help you.
03-24-2013, 12:39 AM
Hmm.. too many people here don't know how to make this senuke crack works.
here is tutor for you guys :
here is tutor for you guys :
Magic Button :
Windows Xp
step 1 : run senuke updater
step 2 : in senuke folder, replace SENuke.exe with omega crack
step 3 : Restart your windows and run in safe mode
step 4 : go to c:\windows\system32\drivers\etc\
step 5 : edit hosts file and add this line:
step 6 : save your host file
step 7 : restart your windows
step 8 : Run SENuke and it will working perfectly
step 9 : Enjoy it Guys.
step 10 : press +1 ADD REPUTATION button if this tutor can help you.
step 1 : run senuke updater
step 2 : in senuke folder, replace SENuke.exe with omega crack
step 3 : Restart your windows and run in safe mode
step 4 : go to c:\windows\system32\drivers\etc\
step 5 : edit hosts file and add this line:
Code:
127.0.0.1 auth.senuke.com
127.0.0.1 www.auth.senuke.com
step 7 : restart your windows
step 8 : Run SENuke and it will working perfectly
step 9 : Enjoy it Guys.
step 10 : press +1 ADD REPUTATION button if this tutor can help you.