(09-17-2012 10:01 PM)Omega Wrote: [ -> ] (09-17-2012 06:48 PM)AlexNeo Wrote: [ -> ] (09-17-2012 08:25 AM)Omega Wrote: [ -> ]I need to know what you guys actually did in causing this error. That error message indicates that you did not install senuke before running the cracked exe.
I just unrar and run the file, and get the error!
Previosly no installation of any Senuke before!
I visit Senuke web site and seems like no download pages!
The setup is included in this one.
Only 1 file inside the WinRar...unzip it and run the file...error appear...not even install yet
Im getting a message when im tryin to post a new social network project, it says:
Unable to find linked Url list
Didnt get this problem on the 37 version and im doin exactly the same.
Can someone help me ? Thx !
OMEGA: I'm reaching out to you as it appears you are a bit of an authority on SENukeX so here goes...
Of course this isn't to say I wouldn't appreciate any other users chiming in on this...
Whenever I run SENuke X I use an advanced version of the Full Monty V3 (direct forum) template - whenever it runs its schedule I get "started by scheduler and unable to complete form validation" in the log and I wondered if that is an error that affects the flow of the scheduler or is it an isolated error for maybe a couple of the SB sites? Its happening on the social bookmarking module when it runs.
Any other users of the Full Monty - can you verify that for the first few days it's only running T2 SB and T2 RSS before moving on to the T1 level modules? I thought the flow would go from T1 to T2 however it appears by default its the reverse in all the Full Monty templates where at it builds T2 first then comes up to the T1 level.
Any input is greatly appreciated.
(09-19-2012 03:32 AM)PhoenixR Wrote: [ -> ]OMEGA: I'm reaching out to you as it appears you are a bit of an authority on SENukeX so here goes...
Of course this isn't to say I wouldn't appreciate any other users chiming in on this...
Whenever I run SENuke X I use an advanced version of the Full Monty V3 (direct forum) template - whenever it runs its schedule I get "started by scheduler and unable to complete form validation" in the log and I wondered if that is an error that affects the flow of the scheduler or is it an isolated error for maybe a couple of the SB sites? Its happening on the social bookmarking module when it runs.
Any other users of the Full Monty - can you verify that for the first few days it's only running T2 SB and T2 RSS before moving on to the T1 level modules? I thought the flow would go from T1 to T2 however it appears by default its the reverse in all the Full Monty templates where at it builds T2 first then comes up to the T1 level.
Any input is greatly appreciated.
I wish I could help you, but unfortunately I do not use senuke like everyone else does. All I could tell you is that due to how it is cracked some options may be limited in what they are supposed to do. Hopefully someone else can post a better answer for you.
Well thanks for at least replying Omega for sure. So anyone else avid users of SENukeX that can answer if this is normal or what?
What do I do wrong?
Senuke X don't want to work and close yourself:
[2012-09-19 01:17:28.234] AssemblyVersion SEnuke X (v.2.6.40), Version:5.1.2600.196608
[2012-09-19 01:17:28.250] Retries was 0 reset to 3
[2012-09-19 01:17:28.250] MaxWorkerThreads was 0 reset to 10
[2012-09-19 01:17:37.828] Failed Certificate Validation - Auth + Auth2, PSS
[2012-09-19 01:17:37.828] Failed Certificate Validation - Auth + Auth2, GCHS
[2012-09-19 01:17:37.828] ActivationManager.Activate - Exception when authenticating at auth.senuke.com-Базовое соединение закрыто: Не удалось установить доверительные отношения для защищенного канала SSL/TLS.
[2012-09-19 01:17:37.828] ActivationManager.Activate - Exception when authenticating at auth.senuke.com- в System.Net.WebClient.UploadDataInternal(Uri address, String method, Byte[] data, WebRequest& request)
в System.Net.WebClient.UploadData(Uri address, String method, Byte[] data)
в System.Net.WebClient.UploadData(String address, Byte[] data)
в SENuke.ActivationManager.Activate(String username, String password, Boolean deactivate, Boolean deactivateAll)
[2012-09-19 01:17:38.656] Failed Certificate Validation - Auth + Auth2, PSS
[2012-09-19 01:17:38.656] Failed Certificate Validation - Auth + Auth2, GCHS
[2012-09-19 01:17:38.656] Failed Certificate Validation - Auth + Auth2, SUB
[2012-09-19 01:17:38.671] Class SEnukeOptions:Sub Save called
[2012-09-19 01:17:38.734] Retries was 0 reset to 3
[2012-09-19 01:17:38.734] MaxWorkerThreads was 0 reset to 10
[2012-09-19 01:17:40.281] Failed Certificate Validation - Auth + Auth2, PSS
[2012-09-19 01:17:40.281] Failed Certificate Validation - Auth + Auth2, GCHS
[2012-09-19 01:17:40.703] Failed Certificate Validation - Auth + Auth2, PSS
[2012-09-19 01:17:40.703] Failed Certificate Validation - Auth + Auth2, GCHS
[2012-09-19 01:17:40.703] Failed Certificate Validation - Auth + Auth2, SUB
[2012-09-19 01:17:40.718] ERROR (Unknown): Settings Failed To load:
[2012-09-19 01:17:42.359] Failed Certificate Validation - Auth + Auth2, PSS
[2012-09-19 01:17:42.359] Failed Certificate Validation - Auth + Auth2, GCHS
[2012-09-19 01:17:42.375] ActivationManager.Activate - Exception when authenticating at auth.senuke.com-Базовое соединение закрыто: Не удалось установить доверительные отношения для защищенного канала SSL/TLS.
[2012-09-19 01:17:42.375] ActivationManager.Activate - Exception when authenticating at auth.senuke.com- в System.Net.WebClient.UploadDataInternal(Uri address, String method, Byte[] data, WebRequest& request)
в System.Net.WebClient.UploadData(Uri address, String method, Byte[] data)
в System.Net.WebClient.UploadData(String address, Byte[] data)
в SENuke.ActivationManager.Activate(String username, String password, Boolean deactivate, Boolean deactivateAll)
[2012-09-19 01:17:42.796] Failed Certificate Validation - Auth + Auth2, PSS
[2012-09-19 01:17:42.796] Failed Certificate Validation - Auth + Auth2, GCHS
[2012-09-19 01:17:42.796] Failed Certificate Validation - Auth + Auth2, SUB
so, when does senuke xcr crack come out? can it be cracked as well? sure hope it can be
I can't seem to update to xcr, can someone download it and upload the whole senuke folder for me so I can crack it.