06-03-2016, 11:56 PM
THE PROGRAM FOR CONFIGURING VPS/VDS SERVERS UNDER NEWSLETTER
![[Image: msamainwindow.gif]](http://bspdev.ru/assets/images/msamainwindow.gif)
If you do e-mail newsletters, you constantly face the question: what to send them ? At the moment there are the following methods of distribution, each of which has a number of disadvantages:
Free email services such as Mail.ru, Gmail.com etc., have strict limits on the number of sent letters: this is usually no more than 1-2 letters per minute and not more than 150-200 emails a day, they are practically unsuitable for mass mailings.
Use mail server of the hosting where your website is located, it is also not too convenient: the limits on such servers is not as hard as free e-mail services, however they are: this is usually 100-500 emails per hour, 2-3 thousand emails a day.
Further, it is possible to use specialized web services for newsletters, such as MailChimp, UniSender, and many others. Here the problem is of another nature: first you need to give a mailing service, their base addresses, which will be a distribution that is not always desirable because often base accumulated over the years and have significant commercial value. Secondly, if the database is large enough, it is necessary to explain its origin i.e. to prove that this is indeed your customers or subscribers, third, if your base is not of sufficient quality and generates a large number of returns (bounce) or complaint, the service may terminate your account, often with no refund. They are forced to do this because the distribution for low-quality bases harm the reputation of their mail servers because of which begin to suffer other users of the service. However, the database often (if not always) are not high quality, especially in the beginning when you just started mailing them. For example, if you were compiling a database of details or a survey of your customers, the result will be "dirty" in terms of filters of postal services: some of the addresses, usually 10-20% are not existing (not valid) because they were spelled incorrectly or just closed or were replaced by others. In addition, some clients could forget about you and upon receipt of the mailing is to report it (click on the "This is spam" in their Inbox). Finally, the use of such a service need to constantly pay a subscription fee that is the greater the more emails you need to send out.
Rent smtp server for mailing. It will be almost the same, but much more expensive - about $ 30 a month instead of 2-3 for a cheap VPS server. In addition, usually rented smtp servers are running as "external smtp relays: their use does not turn out to define not valid' right in the process of mailing. As in the case of blocking IP addresses leased servers you will never find it until you manually review the returns (bounce) about not delivered mails.
The meaning of the Mail Server Admin to give you the opportunity to create cheap servers for mailing, no one could depend and, if necessary, quickly replace them with new ones.
The program tries to automatiseret the process of installation and configuration of programs and services so that the server looked "right" from the point of view of postal services, as well as contain the maximum functionality for use as the "exit point" to send emails. Large mail service, in order to combat spam, have strict requirements for servers from which it comes the mail: a fixed IP address that is bound to a domain, the obligatory presence of a reverse DNS record (PTR) records for this IP, SPF (Sender policy framework), DKIM (Domain keys identified email), DMARC (Domain-based Message Authentication, Reporting and Conformance) records in the DNS zone of the domain, the presence of MX servers for incoming e-mail domain. Proper tuning of these parameters requires specific knowledge and experience, for which you need to spend a lot of time and effort. Mail Server Admin - is based on a decade of our work in the area of email newsletters.
Program automatiseret the installation and configuration of following components and services on a VPS/VDS server:
Install DNS server and configure the zones for the domains and subdomains.
All the necessary records in the DNS zone of a domain: A, NS, DKIM (plus automatic generation of pairs of RSA keys), SPF, DMARC, MX.
Adding/removing domains and subdomains.
Smtp, Pop3, IMAP servers that provide the functions of mail domains on the entrance (MX) and the output.
Create/Delete any number of mailboxes.
Built-in mail client to view mail in boxes.
Web server (nginx) and PHP to host the landing pages and redirects.
Ftp server for file management.
Socks5 server on each available IP address. Thus a pair of IP-Domain can be used as a "exit point" for the built-in Smtp server AMS Enterprise, with built-in Smtp server that AMS will work indistinguishable from an ordinary Smtp server. As a result, VPS will have virtually no heavy loads, which reduces the performance requirements and the cost of the VPS.
All VPS installed on the server software selected and optimized for minimal memory consumption and CPU resources so that it will be possible to use the cheap VPS/VDS and dedicated servers.
Integration with AMS Enterprise: generating configuration file for auto-configuration AMS: automatic creation of proxy lists, profiles, send, accounts, sender's DKIM signatures, realtime statistics, returns (bounce). Thus, AMS is configured to use the created servers in one click !
Fast and comprehensive health check on the server and all installed services, availability of mailboxes, as well as verification of IP addresses for listing in the RBL block lists (spamcop, Spamhaus, etc.).
The result of the program is correctly configured server under the newsletter, which, from the point of view of the host party, indistinguishable from the corporate mail servers.
The resulting server can be used with other software for distribution, not necessarily with AMS Enterprise (provided that these programs have enough functionality in the first place advanced built-in Smtp server).
System requirements
Windows Vista+
128 MB RAM
Any CPU.
Server requirements and hosting
- OS: CentOS 6.x x64
- RAM: 256Mb or higher
- CPU: 1Ghz or higher
- HDD: 5Gb or more
- Virtualization: [Reported by Members as SPAM THREAD], Virtuozzo, etc. In case of virtualization using XEN or KVM you will need to manually register the connected ip addresses in the server configuration.
-At least one additional IP for the server, because for proper operation of Name-servers need 2 ip addresses.
- At least one domain from which you are sending mail.
- Ability to register reverse PTR for the IP addresses in the personal Cabinet of the host and/or server control panel.
Limitations of the demo version
- Ability to configure only one VPS and not more than two IP addresses on this server.
- Installation and work on the same physical machine.
This is a demo.Please make Nulled&Crack
DOWNLOAD
Free email services such as Mail.ru, Gmail.com etc., have strict limits on the number of sent letters: this is usually no more than 1-2 letters per minute and not more than 150-200 emails a day, they are practically unsuitable for mass mailings.
Use mail server of the hosting where your website is located, it is also not too convenient: the limits on such servers is not as hard as free e-mail services, however they are: this is usually 100-500 emails per hour, 2-3 thousand emails a day.
Further, it is possible to use specialized web services for newsletters, such as MailChimp, UniSender, and many others. Here the problem is of another nature: first you need to give a mailing service, their base addresses, which will be a distribution that is not always desirable because often base accumulated over the years and have significant commercial value. Secondly, if the database is large enough, it is necessary to explain its origin i.e. to prove that this is indeed your customers or subscribers, third, if your base is not of sufficient quality and generates a large number of returns (bounce) or complaint, the service may terminate your account, often with no refund. They are forced to do this because the distribution for low-quality bases harm the reputation of their mail servers because of which begin to suffer other users of the service. However, the database often (if not always) are not high quality, especially in the beginning when you just started mailing them. For example, if you were compiling a database of details or a survey of your customers, the result will be "dirty" in terms of filters of postal services: some of the addresses, usually 10-20% are not existing (not valid) because they were spelled incorrectly or just closed or were replaced by others. In addition, some clients could forget about you and upon receipt of the mailing is to report it (click on the "This is spam" in their Inbox). Finally, the use of such a service need to constantly pay a subscription fee that is the greater the more emails you need to send out.
Rent smtp server for mailing. It will be almost the same, but much more expensive - about $ 30 a month instead of 2-3 for a cheap VPS server. In addition, usually rented smtp servers are running as "external smtp relays: their use does not turn out to define not valid' right in the process of mailing. As in the case of blocking IP addresses leased servers you will never find it until you manually review the returns (bounce) about not delivered mails.
The meaning of the Mail Server Admin to give you the opportunity to create cheap servers for mailing, no one could depend and, if necessary, quickly replace them with new ones.
The program tries to automatiseret the process of installation and configuration of programs and services so that the server looked "right" from the point of view of postal services, as well as contain the maximum functionality for use as the "exit point" to send emails. Large mail service, in order to combat spam, have strict requirements for servers from which it comes the mail: a fixed IP address that is bound to a domain, the obligatory presence of a reverse DNS record (PTR) records for this IP, SPF (Sender policy framework), DKIM (Domain keys identified email), DMARC (Domain-based Message Authentication, Reporting and Conformance) records in the DNS zone of the domain, the presence of MX servers for incoming e-mail domain. Proper tuning of these parameters requires specific knowledge and experience, for which you need to spend a lot of time and effort. Mail Server Admin - is based on a decade of our work in the area of email newsletters.
Program automatiseret the installation and configuration of following components and services on a VPS/VDS server:
Install DNS server and configure the zones for the domains and subdomains.
All the necessary records in the DNS zone of a domain: A, NS, DKIM (plus automatic generation of pairs of RSA keys), SPF, DMARC, MX.
Adding/removing domains and subdomains.
Smtp, Pop3, IMAP servers that provide the functions of mail domains on the entrance (MX) and the output.
Create/Delete any number of mailboxes.
Built-in mail client to view mail in boxes.
Web server (nginx) and PHP to host the landing pages and redirects.
Ftp server for file management.
Socks5 server on each available IP address. Thus a pair of IP-Domain can be used as a "exit point" for the built-in Smtp server AMS Enterprise, with built-in Smtp server that AMS will work indistinguishable from an ordinary Smtp server. As a result, VPS will have virtually no heavy loads, which reduces the performance requirements and the cost of the VPS.
All VPS installed on the server software selected and optimized for minimal memory consumption and CPU resources so that it will be possible to use the cheap VPS/VDS and dedicated servers.
Integration with AMS Enterprise: generating configuration file for auto-configuration AMS: automatic creation of proxy lists, profiles, send, accounts, sender's DKIM signatures, realtime statistics, returns (bounce). Thus, AMS is configured to use the created servers in one click !
Fast and comprehensive health check on the server and all installed services, availability of mailboxes, as well as verification of IP addresses for listing in the RBL block lists (spamcop, Spamhaus, etc.).
The result of the program is correctly configured server under the newsletter, which, from the point of view of the host party, indistinguishable from the corporate mail servers.
The resulting server can be used with other software for distribution, not necessarily with AMS Enterprise (provided that these programs have enough functionality in the first place advanced built-in Smtp server).
System requirements
Windows Vista+
128 MB RAM
Any CPU.
Server requirements and hosting
- OS: CentOS 6.x x64
- RAM: 256Mb or higher
- CPU: 1Ghz or higher
- HDD: 5Gb or more
- Virtualization: [Reported by Members as SPAM THREAD], Virtuozzo, etc. In case of virtualization using XEN or KVM you will need to manually register the connected ip addresses in the server configuration.
-At least one additional IP for the server, because for proper operation of Name-servers need 2 ip addresses.
- At least one domain from which you are sending mail.
- Ability to register reverse PTR for the IP addresses in the personal Cabinet of the host and/or server control panel.
Limitations of the demo version
- Ability to configure only one VPS and not more than two IP addresses on this server.
- Installation and work on the same physical machine.
This is a demo.Please make Nulled&Crack
DOWNLOAD