09-13-2014, 02:24 PM
Hand-on labs for CCNA level. More than 340 minutes of CCNA level configuration practices on rela IOS.
After finishing these practices you should be comfortable with
basic Cisco IOS configurations and run major routing protocols in your
network.
I used a network simulator (GNS3) for my labs but you may use these guidlines on real hardware with no change.
[list][*]
[b]
What are the requirements?
[/b][list][*][b]GNS3 software[/b][/list][*]
[b]
What am I going to get from this course?[/b]
[list][*][b]Over 30 lectures and 5.5 hours of content![/b][*][b]Basic configurations of routers and routing protocols[/b][/list]
[*]
[b]
What is the target audience?[/b][/list][b]Link : [code]https://www.udemy.com/from-ccna-to-ccie-part-1-ccna-labs/?dtcode=HXIp3yX1uvD0[/code][/b]
After finishing these practices you should be comfortable with
basic Cisco IOS configurations and run major routing protocols in your
network.
I used a network simulator (GNS3) for my labs but you may use these guidlines on real hardware with no change.
[list][*]
[b]
What are the requirements?
[/b][list][*][b]GNS3 software[/b][/list][*]
[b]
What am I going to get from this course?[/b]
[list][*][b]Over 30 lectures and 5.5 hours of content![/b][*][b]Basic configurations of routers and routing protocols[/b][/list]
[*]
[b]
What is the target audience?[/b][/list][b]Link : [code]https://www.udemy.com/from-ccna-to-ccie-part-1-ccna-labs/?dtcode=HXIp3yX1uvD0[/code][/b]