So, I went back to BHW where this software was given away and found this in the thread for steps to hope fully take care of X-Spinner being recognized by third party software:
Code:
1. Close X-Spinner
2. Follow this guide to enable the Take Ownership option in the right-click menu.
3. Go to C:\Windows\System32\drivers\etc
4. Right-click the hosts file and click Take Ownership
5. Open notepad in admin mode (type notepad in start and press ctrl+shift+enter).
6. Open the hosts file via this notepad
7. Enter the required entries and save (it should save just like that instead of asking you to save as a new file).
8. CLOSE NOTEPAD
9. Open CMD in Admin mode (type CMD in start and press ctrl+shift+enter).
10. Type in "ipconfig /flushdns" and press enter
11. Type in "nbtstat -R" and press enter
12. Now go and check if the sites open in IE (they shouldn't open).
13. Start the X-Spinner service and go to IE and try to visit the sites - you will get a message from X-Spinner to use the POST command, which means the API is working.
14. You can now use a software to interface with API and spin to your heart's content!
Don't get me wrong. I think this would be awesome if it does work and it seems like a minor problem, but one that is frustrating. So, we'll see what happens.
Will test and return.
Also, you may want to Stop the W3SVC in Task Manager. Reading more about issues.
Quote:i think the reason its not recognizing the host file is because you haven't turn off one of the services! here is what i am talking about -
Control Panel>System and Security>Administrative Tools>Services > Then select "World Wide Web Service" and hit the stop button at top left corner.
after that it should work all fine. Hope that helps!
Another part to add to Hosts file:
Code:
Problem solved. I had to copy-paste this: "127.0.0.1 updates.senuke.com" into the hosts file
This was not given to copy-paste in the above window. But it was available in the Other Settings tab.
Ok, following the posts #51 and #52, I got it to work perfectly. So, make sure you update to Version 2.9 after you download and then follow these steps and it works.
Enjoy.
So how do you use this of you don't have any of the other program listed? Where do you copy and paste the article to spin? And why would anyone use this, if they already purchased The Best Spinner software?
At last got it working
Follow these....
1)Extract zip to a folder NOT having ANY blank spaces.Any Root drive would be better.
2)Run X-Spinner.exe and let it update
3)Open your hosts file and check for....
127.0.0.1 wordai.com
127.0.0.1
http://www.wordai.com
127.0.0.1 thebestspinner.com
127.0.0.1
http://www.thebestspinner.com
127.0.0.1 spinrewriter.com
127.0.0.1
http://www.spinrewriter.com
If not present then paste it.
4)When asked for Serial number,enter "xspinnerbhwfree".
Enjoy your free tbs,spinrewriter and wordAI API.
Be sure to close all programs listening to port80.
great share , thank you bro!
when i start api service i got error
![[Image: ePWNUh3.jpg]](http://i.imgur.com/ePWNUh3.jpg)
i dont know how to use it
Where i can get for free thebestspinner, spinrewriter or something which would work with x-spinner. I dont understand which soft i must to use whith x-spinner if they all are pay
UpdateExe is not work
Sorry update work but i dont understand how to use it
And why i only in Pro version?
@Umairpk :-just change the 'listning ip' in "other settings" to 192.168.246.1 or try different listning ports like 8080,8888 etc.
@dkv023 :-you don't need any paid software.There is inbuilt "test spin" where you can try all spinners.
Hope this helps.