05-07-2014, 05:28 PM
Android 4.0 L2TP VPN Setup
Step 1:
Go to the Settings tab.
Step 2:
Under Settings tab click ...More setting.
Step 3:
On the next window click VPN.
Step 4:
Under VPN click Add VPN Network.
Step 5:
Next screen will ask you for VPN Name write Bucklor L2TP, In Type choose your connection type L2TP/IPSec PSK.
Step 6:
In the Server Address put IP Address of the server you want to use(Login Client Area, then click Servers to get the IP), In IPSec pre-shared key field enter the key podvpn, then click Save
Step 7:
In this screen, click Bucklor L2TP.
Step 10:
Enter Username and Password provided by Bucklor and click Connect.
Step 11:
You are now connected.
![[Image: 133926oh928gg79a6c6ga6.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/133926oh928gg79a6c6ga6.jpg)
Step 1:
Go to the Settings tab.
![[Image: 113231nf6mhx5c3m667zcf.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/113231nf6mhx5c3m667zcf.jpg)
Step 2:
Under Settings tab click ...More setting.
![[Image: 113257e5b3iya3tgi357ie.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/113257e5b3iya3tgi357ie.jpg)
Step 3:
On the next window click VPN.
![[Image: 113316mpefepraech3vajp.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/113316mpefepraech3vajp.jpg)
Step 4:
Under VPN click Add VPN Network.
![[Image: 113450gy1twp0zpsgw0wbf.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/113450gy1twp0zpsgw0wbf.jpg)
Step 5:
Next screen will ask you for VPN Name write Bucklor L2TP, In Type choose your connection type L2TP/IPSec PSK.
![[Image: 113930ffxtowxgur1hcsge.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/113930ffxtowxgur1hcsge.jpg)
Step 6:
In the Server Address put IP Address of the server you want to use(Login Client Area, then click Servers to get the IP), In IPSec pre-shared key field enter the key podvpn, then click Save
![[Image: 114415mg5dr6g9sgbiddxd.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/114415mg5dr6g9sgbiddxd.jpg)
Step 7:
In this screen, click Bucklor L2TP.
![[Image: 133636qsz81xk88g00t0y0.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/133636qsz81xk88g00t0y0.jpg)
Step 10:
Enter Username and Password provided by Bucklor and click Connect.
![[Image: 133818po403j4m9ejtgmo9.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/133818po403j4m9ejtgmo9.jpg)
Step 11:
You are now connected.
![[Image: 133926oh928gg79a6c6ga6.jpg]](http://www.bucklor.com/data/attachment/portal/201310/11/133926oh928gg79a6c6ga6.jpg)