Tutorial-English-Guide-Jingling

[kriendor]

Tutorial I found looking for a way to monitize Jingling Bot

This is not my own creation, credit goes to someone els, but is clear that is not where I got it.
It as been copied and paste multiples time.





1/ The first and main tab. You'll use this one pretty much all the time.

2/ 2nd tab, it's point is to add
link with more precise control, there you can specify a daily flow
amount, that kind of things. Not really useful.

3/ 3rd tab : Involving QQ. If you ever need this, you probably can understand chinese, and you're not reading this guide.

4/ The number of sites you can add. Based on your computer's performance. Goes between 1 and 6.

5/ The are where you'll be able to manage your links. More on that later.

6/ That button is used to add a new
link into Jingling. The 2nd button next to it is to add a link with more
control over flow. 2nd one is pretty useless for us aswell.

7/ Random informations. You don't care about this at all.



Okay. Now this should be a little more clear. Now let's talk about adding a link, and change its settings.



To add a link, you click on the button marked "6" on the previous
screenshot, you past your link in, and press the OK button (it's the one
on the left.).

Your site should now show up in the 5th panel.



Let's see what we got here.







1/ Edit your link button. Pretty simple.

2/ Amout of view your site got. Resets every day. Not 100% accurate.

3/ State of your link. Basically, green is good, red is bad.

4/ Use this to put a link on pause. It'll ask for a confirmation. Just press it again afterwards to restart it.

5/ Delete your link. Simple aswell.

6/ Control flow based on time. This
will open a window with a panel divided into 24 hours, and you'll be
able to limit traffic based on hours of they day. Not that useful for
most users. However, if you have to use it, it's pretty straigh forward.
The buttons in the bottom are, from left to right : Save, Default,
Reset, Cancel.

7/ Traffic origin configuration. Now
that's a useful tab. Allows you to get traffic worldwide, from China
only, or everywhere except China. More on that later too

8/ Advanced configuration. That'll be explained aswell.



Trafic origin



To access that, clic on the button 7 on the main tab. Here's what you get :







1/ Worldwide traffic.

2/ Both of them are Chinese only traffic.

3/ Western traffic only. This will what you'll use mostly.

4/ Custom traffic. Allow you to customize traffic, chinese regions only, so not users here.



So, if you wanna set Jingling to western traffic only, you just have to
tick box 3, and save. The four buttons are, from left to right : Save,
Default, Reset, Cancel.



Link configuration



Now that the source of your traffic is configured, let's see what we got
in advanced configuration. To access it, press button marked 8 on main
tab.







1/ IPV ratio : Number of subpages an
IP will visit. 1:1 means it will only acces the link, and exit. 1:2
means it'll go the the link, find a subpage and clic on it. 1:3 means it
will go on main link, find a subpage, clic, find a sub-subpage, and
clic.

2/ That will configure the behavior
of your links : The first box will behave with the IPV ratio, clicking
on random links on the page. The 2nd one will reload the page only. The
3rd one will access a subpage, then open the original link again. The
4th will search for a matching subpage : you can enter what you want in
the textbox, the bot will search for it, and access it if it can find
it.

3/ Enable or disable popup. Enable
it if you site has popups in it. If you're not sure, I'll talk about the
Jingling link testing tool later on. If you have popups, you want to
set it a 20%.

4/ That's the destination
configuration. Used to redirect traffic after a page load. You can add
up to 5 links here, and configure a % for each link.

5/ That's the referer. You can
change the referer URL here. Add up to 20 links, and chose it's %. For
instance, if you set 50% on twitter.com and 50% on facebook.com, you're
going to have half of your traffic coming from each of these sites.



Add a link with visits flow control



Using Jingling, you can also add a link and configure the amout of
visitor you're going to get. To do that, you will have to switch to the
second tab on Jingling (button #2 on the first image on this post), and
click to add a new website. You're going to end up on this page :







1/ Add here your link URL.

2/ This is the amount of time the visitor will sped on your link. Configure as needed.

3/ Amount of visitor per day. If you
want more than 600, add your URL in the first tab of the software. Note
that the amount of view will be multiplied by your IPV ratio. If each
visitor is set to view 3 subpages, you're going to have 3 times the
visits.

4/ IPV ratio. Same as before, refer to the explaination earlier.

5/ Traffic source. Refer to the information earlier in the post aswell.



One you have added a link with this tool, the buttons to configure flow
based on time (#6 on my second image) will be disabled. That's normal.


Hope you enjoy ^^

ps: You can still add rep :P

[mark7437]

Thanks, have read other instructions and all have been incomplete. Thanks for great job

[mark7437]

Great job, makes so much difference to actually know what you are doing.

[Queen Net]

kriendor : please answer pm sent

[luckyducky777]

Thanks for the this! :)